COWs

MiniCOW

  • example 1
  • example 2
  • example 3
  • example 3
full size image
Moved By:
One ton truck rated to pull 10,000 lbs with 600-1,000 lbs tongue weight
Support Structure:
All steel custom designed trailer, outrigger support system, galvanized fenders, 2-5/16" ball
Axles/Ratings:
Tandem torsion ride axles (10,400 lbs)
Approximate Weight:
7,500 lbs*
Capacities/Payload:
Payload 2,500 lbs*
Overall Exterior Size:
8'2" Wide x 21' Long x 12'6" High
Setup Space Required:
16' Wide x 21' Long
Shelter:
All aluminum construction, studs, walls, rafters, and aluminum tread plate roof
Interior Size:
A: 5'5" x 9'5" x 7'5" B: Eqpt. Rm.5'5" x 7'10"x7'5"; Gen. Rm. 5'5"x2'6"x7'5"
Insulation:
Rigid foam, R-16 walls, R-16 ceiling
Flooring:
1-1/8" tongue and groove subfloor with vinyl tile
Waveguide Entry:
Four (4) 1.5" I.D. pvc sleeves to equipment room
Door:
2'6" x 6' insulated aluminum to equipment room. Four (4) 2' doors to generator room (6'x11' model). Doors outfitted with padlockable stainless steel hardware
Electrical:
100 amp single phase breaker panel, fusible disconnect
HVAC:
A: Single or twin 24,000 Btuh mounted on front B: Single 24,000 Btuh mounted on rear
Tower Height/Design:
Two (2) design configurations available:
  • Telescoping 60' locking ring self supporting pneumatic mast with compressor and control valve, mounted vertically
  • Telescoping 80' locking ring guyed pneumatic mast with compressor and control valve, pivoted on front deck Note: 80' mast on 6' x 10' model will not support a generator on front deck
Tower Design Windload:
60' pneumatic mast 49 MPH or 80' pneumatic mast 46 MPH per EIA 222
Tower/Loading Options:
Pneumatic masts are for light duty loading (200 lbs and 14 square foot wind sail area) 3 omni whips DB810 or equal
Auxiliary Power:
Generator 7.5 to 15 KW, diesel or LP

Options

Miscellaneous:
Cable Ladder, Aluminum Angle, Telco Board, High/Low Temperature Alarm, Smoke Alarm, Door Alarm, Surge Arrestor, Halo Ground, Electrical Upgrades, Manual Transfer Switch, Exterior Lights, Generators, Automatic Transfer Switch, Fire Suppression System, Aluminum Storage Boxes, Conductive Tile
Mast:
Pan & Tilt Controller

*Weight varies with options
Custom layouts available

FWT, inc. manufactures top quality guyed towers, self-supporting towers and monopoles.

FWT, Inc.
P.O. Box 8579
Fort Worth, TX 76124-0597

Toll Free: 800-433-1816
Fax: (817) 255-2957
Email: info@fwtinc.com

Copyright 2006 FWT, Inc. - All Rights Reserved